| Module |
| GNSS |
| Zellular |
| Spannungsversorgung |
| Connector |
4-pin industrial DC power socket
|
| Eingangsspannung (Bereich) |
9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max
|
| Stromverbrauch |
3 W bis 6 W
|
| Elektronik |
| Bluetooth® Technologie |
| Interface |
| OBD Interface |
| Physische Eigenschaften |
| Abmessungen |
100 x 30 x 93.4 mm (BxHxT)
|
| Gewicht |
241g
|
| Gehäuse Material |
Aluminum housing
|
| Befestigungsoptionen |
DIN rail, Flat surface
|
| Betriebsumgebung |
| Umgebungstemperatur |
-40 °C to 75 °C
|
| Luftfeuchtigkeit |
10 % to 90 % nicht kondensierend
|
| IP-Schutzart |
IP30
|
| Features |
| Zertifizierungen und Zulassungen |
| Magenetische Halterung |
| Mobile |
| Mobile module |
5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL;
3G – 42 Mbps DL, 5.76Mbps UL
|
| Status |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
|
| SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS,
scheduled SMS, SMS autoreply, SMPP
|
| USSD |
Supports sending and reading Unstructured Supplementary Service Data messages
|
| Black/White list |
Operator black/white list
|
| Multiple PDN |
Possibility to use different PDNs for multiple network access and services
|
| Band management |
Band lock, Used band status display
|
| APN |
Auto APN
|
| Bridge |
Direct connection (bridge) between mobile ISP and device on LAN
|
| Passthrough |
Router assigns its mobile WAN IP address to another device on LAN
|
| Wireless |
| ETHERNET |
| LAN |
1 x LAN port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
|
| NETWORK |
| Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
|
| Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP,
Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
|
| VoIP passthrough support |
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
|
| Connection monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
|
| Firewall |
Port forward, traffic rules, custom rules
|
| DHCP |
Static and dynamic IP allocation, DHCP Relay
|
| DDNS |
Supported >25 service providers, others can be configured manually
|
| Network backup |
Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
|
| Load balancing |
Balance Internet traffic over multiple WAN connections
|
| SSHFS |
Possibility to mount remote file system via SSH protocol
|
| Sicherheit |
| Authentication |
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
|
| Firewall |
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
|
| Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,
SYN-RST, X-mas, NULL flags, FIN scan attacks)
|
| VLAN |
Port and tag-based VLAN separation
|
| Mobile quota control |
Mobile data limit, customizable period, start time, warning limit, phone number
|
| WEB filter |
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
|
| Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter
|
| VPN |
| OpenVPN |
Multiple clients and a server can run simultaneously, 27 encryption methods
|
| OpenVPN Encryption |
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128,
AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB
192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256,
AES-256-OFB 256, AES-256-CBC 256
|
| IPsec |
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8,
AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
|
| GRE |
GRE tunnel, GRE tunnel over IPsec support
|
| PPTP, L2TP |
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
|
| Stunnel |
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
|
| DMVPN |
Method of building scalable IPsec VPNs
|
| SSTP |
SSTP client instance support
|
| ZeroTier |
ZeroTier VPN client support
|
| WireGuard |
WireGuard VPN client and server support
|
| Tinc |
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
|
| OPC UA |
| MODBUS |
| ID range (slave) |
Respond to one ID in range [1;255] or any
|
| Allow Remote Access (slave) |
Allow access through WAN
|
| Custom registers (slave) |
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS
TCP Slave functionality
|
| DATA TO SERVER |
| Protocol |
HTTP(S), MQTT, Azure MQTT, Kinesis
|
| MQTT GATEWAY |
| Modbus MQTT Gateway |
Allows sending commands and receiving data from MODBUS Master through MQTT broker
|
| DNP3 |
| Supported modes |
TCP Master, DNP3 Outstation
|
| DLMS |
| API |
| MONITORING & MANAGEMENT |
| WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
|
| FOTA |
Firmware update from server, automatic notification
|
| SSH |
SSH (v1, v2)
|
| SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
|
| Call |
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
|
| TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
|
| MQTT |
MQTT Broker, MQTT publisher
|
| SNMP |
SNMP (v1, v2, v3), SNMP Trap
|
| JSON-RPC |
Management API over HTTP/HTTPS
|
| RMS |
Teltonika Remote Management System (RMS)
|
| MODBUS |
MODBUS TCP status/control
|
| IOT PLATFORMS |
| Cloud of Things |
Allows monitoring of: Device data, Mobile data, Network info, Availability
|
| ThingWorx |
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
|
| Cumulocity |
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection
Type, Operator, Signal Strength
|
| CumulocityAzure IoT Hub |
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state,
Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP,
WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
|
| SYSTEM CHARACTERISTICS |
| CPU |
Single core ARM Cortex A7, 1.5 GHz
|
| RAM |
256 MB (128 MB available for userspace)
|
| FLASH storage |
512 MB (200 MB available for userspace)
|
| FIRMWARE / CONFIGURATION |
| WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup
|
| FOTA |
Update FW
|
| RMS |
Update FW/configuration for multiple devices at once
|
| Keep settings |
Update FW without losing current configuration
|
| FIRMWARE CUSTOMISATION |
| Operating system |
Busybox shell, Lua, C, C++, and Python, Java in Package manager
|
| Supported languages |
SDK package with build environment provided
|
| GPL customization |
RutOS (OpenWrt based Linux OS)
|
| LOCATION TRACKING |
| USB |
| INPUT / OUTPUT |
| Input |
1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
|
| Output |
1 x Digital Output, Open collector output, max output 30 V, 300 mA
|
| Events |
Email, RMS, SMS
|
| I/O juggler |
Allows to set certain I/O conditions to initiate event
|
| PHYSIKALISCHE SCHNITTSTELLEN |
| Ethernet |
1 x RJ45 port, 10/100/1000 Mbps
|
| I/O’s |
2 x Configurable I/O pins on 4-pin power connector
|
| Status LEDs |
3 x connection type status LEDs, 3 x connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
|
| SIM |
1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
|
| Power |
1 x 4-pin power connector
|
| Antennas |
4 x SMA for Mobile
|
| USB |
1 x Virtual network interface via micro USB
|
| Reset |
Reboot/User default reset/Factory reset button
|
| EMC EMISSIONS & IMMUNITY |
| RF |
| SAFETY |
| PERFORMANCE SPECIFICATIONS |
Lieferung zwischen -