| Module |
| GNSS |
| Zellular |
| Spannungsversorgung |
| Connector |
4-pin industrial DC power socket
|
| Eingangsspannung (Bereich) |
9 - 30 VDC, reverse polarity protection, voltage surge/transient protection
|
| PoE (passive) |
Passive PoE can be installed upon request
|
| Stromverbrauch |
2.4 W bis 4.7 W
|
| Elektronik |
| Bluetooth® Technologie |
| Interface |
| OBD Interface |
| Physische Eigenschaften |
| Abmessungen |
93.2 x 100 x 30 mm (BxHxT)
|
| Gewicht |
243 g
|
| Gehäuse Material |
Aluminum housing
|
| Befestigungsoptionen |
DIN rail, flat surface placement
|
| Betriebsumgebung |
| Umgebungstemperatur |
-40 °C bis 75 °C
|
| Luftfeuchtigkeit |
10% bis 90% nicht kondensierend
|
| IP-Schutzart |
IP30
|
| Features |
| Zertifizierungen und Zulassungen |
| Regulatorisch |
CE, UKCA, RCM, UCRF, EAC, WEEE, CB
|
| Magenetische Halterung |
| Mobile |
| Mobile module |
4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
|
| Status |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation
|
| SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS,
scheduled SMS, SMS autoreply, SMPP
|
| USSD |
Supports sending and reading Unstructured Supplementary Service Data messages
|
| Black/White list |
Operator black/white list
|
| Multiple PDN |
Possibility to use different PDNs for multiple network access and services
|
| Band management |
Band lock, Used band status display
|
| APN |
Auto APN
|
| Bridge |
Direct connection (bridge) between mobile ISP and device on LAN
|
| Passthrough |
Router assigns its mobile WAN IP address to another device on LAN
|
| Wireless |
| Wireless mode |
802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)
|
| Wi-Fi security |
WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
|
| SSID/ESSID |
ESSID stealth mode
|
| Wi-Fi users |
Up to 50 simultaneous connections
|
| Wireless Connectivity Features |
Wireless mesh (802.11s), fast roaming (802.11r)
|
| Wireless MAC filter |
Whitelist, blacklist
|
| Wireless QR code generator |
Once scanned, a user will automatically enter your network without needing to input login information
|
| ETHERNET |
| WAN |
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
|
| LAN |
1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
|
| NETWORK |
| Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
|
| Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP,
Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
|
| VoIP passthrough support |
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
|
| Connection monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
|
| Firewall |
Port forward, traffic rules, custom rules
|
| Firewall status page |
View all your Firewall statistics, rules, and rule counters
|
| Ports management |
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
|
| Network topology |
Visual representation of your network, showing which devices are connected to which other devices
|
| DHCP |
Static and dynamic IP allocation, DHCP Relay
|
| QoS / Smart Queue Management (SQM) |
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
|
| DDNS |
Supported >25 service providers, others can be configured manually
|
| Network backup |
VRRP, Wired options, each of which can be used as an automatic Failover, Wi-Fi WAN, Mobile
|
| Load balancing |
Balance Internet traffic over multiple WAN connections
|
| Hotspot |
Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden,
user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable
themes and option to upload and download customised hotspot themes
|
| SSHFS |
Possibility to mount remote file system via SSH protocol
|
| Sicherheit |
| Authentication |
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
|
| Firewall |
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
|
| Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,
SYN-RST, X-mas, NULL flags, FIN scan attacks)
|
| VLAN |
Port and tag-based VLAN separation
|
| Mobile quota control |
Mobile data limit, customizable period, start time, warning limit, phone number
|
| WEB filter |
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
|
| Access control |
Flexible access control of SSH, Web interface, CLI and Telnet
|
| VPN |
| OpenVPN |
Multiple clients and a server can run simultaneously, 27 encryption methods
|
| OpenVPN Encryption |
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128,
AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB
192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256,
AES-256-OFB 256, AES-256-CBC 256
|
| IPsec |
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8,
AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
|
| GRE |
GRE tunnel, GRE tunnel over IPsec support
|
| PPTP, L2TP |
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
|
| Stunnel |
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
|
| DMVPN |
Method of building scalable IPsec VPNs
|
| SSTP |
SSTP client instance support
|
| ZeroTier |
ZeroTier VPN client support
|
| WireGuard |
WireGuard VPN client and server support
|
| Tinc |
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support
|
| Tailscale |
Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open
source WireGuard protocol
|
| OPC UA |
| Supported modes |
Client, Serve
|
| Supported connection types |
TCP
|
| MODBUS |
| Supported modes |
Server, Client
|
| Supported connection types |
TCP, USB
|
| Custom registers |
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS
TCP Slave functionality
|
| Supported data formats |
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB,
BADC), HEX, ASCII
|
| DATA TO SERVER |
| Protocol |
HTTP(S), MQTT, Azure MQTT
|
| Data to server |
Extract parameters from multiple sources and different protocols, and send them all to a single server
|
| MQTT GATEWAY |
| Modbus MQTT Gateway |
Allows sending commands and receiving data from MODBUS Master through MQTT broker
|
| DNP3 |
| Supported modes |
Station, Outstation
|
| Supported connection |
TCP, USB
|
| DLMS |
| DLMS Support |
DLMS - standard protocol for utility meter data exchange
|
| API |
| MONITORING & MANAGEMENT |
| WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
|
| FOTA |
Firmware update from server, automatic notification
|
| SSH |
SSH (v1, v2)
|
| SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
|
| Call |
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/of
|
| TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
|
| MQTT |
MQTT Broker, MQTT publisher
|
| SNMP |
SNMP (v1, v2, v3), SNMP Trap
|
| JSON-RPC |
Management API over HTTP/HTTPS
|
| RMS |
Teltonika Remote Management System (RMS)
|
| MODBUS |
MODBUS TCP status/contro
|
| IOT PLATFORMS |
| Cloud of Things |
Allows monitoring of: Device data, Mobile data, Network info, Availability
|
| ThingWorx |
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
|
| Cumulocity |
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection
Type, Operator, Signal Strength
|
| CumulocityAzure IoT Hub |
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state,
Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP,
WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
|
| SYSTEM CHARACTERISTICS |
| CPU |
Mediatek, 580 MHz, MIPS 24KEc
|
| RAM |
128 MB, DDR2
|
| FLASH storage |
16 MB serial NOR flash
|
| FIRMWARE / CONFIGURATION |
| WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup
|
| FOTA |
Update FW
|
| RMS |
Update FW/configuration for multiple devices at once
|
| Keep settings |
Update FW without losing current configuration
|
| FIRMWARE CUSTOMISATION |
| Operating system |
Busybox shell, Lua, C, C++
|
| Supported languages |
SDK package with build environment provided
You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements
in our firmware to fit your or your clients’ needs
|
| GPL customization |
RutOS (OpenWrt based Linux OS)
|
| LOCATION TRACKING |
| USB |
| INPUT / OUTPUT |
| Input |
2 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
|
| Output |
2 x Digital Output, Open collector output, max output 30 V, 300 mA
|
| Events |
Email, RMS, SMS
|
| I/O juggler |
Allows to set certain I/O conditions to initiate event
|
| PHYSIKALISCHE SCHNITTSTELLEN |
| Ethernet |
2 x RJ45 ports, 10/100 Mbps
|
| I/O’s |
2 x Digital Input, 2 x Digital Output on 4-pin power connector
|
| Status LEDs |
2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power
|
| SIM |
1 x SIM slot (Mini SIM - 2FF), 1.8 V/3 V, external SIM holder
|
| Power |
1 x 4-pin power connector
|
| Antennas |
2 x SMA for LTE, 2 x RP-SMA for Wi-Fi
|
| Reset |
Reboot/User default reset/Factory reset button
|
| EMC EMISSIONS & IMMUNITY |
| RF |
| SAFETY |
| PERFORMANCE SPECIFICATIONS |
Lieferung zwischen - 
